Search results for "Paint adhesion testing"
showing 7 items of 7 documents
Steel-concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions
2005
Experimental results of the local bond stress-slip relationship of reinforcing bars embedded in lightweight fiber reinforced concrete with expanded clay aggregates are presented. The effect of the following parameters were investigated: - dimension of specimens; - anchorage length; - percentages of hooked steel fibers; - geometrical ratio of transverse reinforcement; - confinement external transverse pressure. Prismatic specimens with deformed steel bars embedded for a fixed length equal to five and eight equivalent diameters were tested under both monotonic and cyclic reversal imposed displacements at the tip of the bars, in controlled displacement tests. The influence of the above mention…
Laser induced decohesion of coatings: probing by laser ultrasonics.
2002
The aim of the present study is to investigate a conventional laser-ultrasonics technique for the determination of intrinsic properties of oxide coatings and their adhesion strength on a metallic substrate. The good agreement between experiments and computations in an epicenter configuration allows determining the longitudinal wave velocity as well as the Young's modulus of the oxide coatings versus the porosity. For a critical value of the laser energy, a breakdown at the coating-substrate interface is generated by the laser irradiation. The critical tensile stress field developed at the coating/substrate interface, which leads to the interfacial fracture, can be easily calculated. The val…
Use of micro-tomography for validation of method to identify interfacial shear strength from tensile tests of short regenerated cellulose fibre compo…
2016
The interfacial shear strength of short regenerated cellulose fibre/polylactide composites was characterized by means of an industry-friendly adhesion test method. The interfacial shear strength was back-calculated from the experimental tensile stress-strain curves of composites by using a micro-mechanical model. The parameters characterizing the microstructure of the composites, e.g. fibre length and orientation distributions, used as input in the model were obtained by micro-tomography. The investigation was carried out on composites with untreated and surface treated fibres with various fibre weight contents (5wt%, 10wt%, and 15wt% for untreated fibres, and 15wt% for treated fibres). The…
Effect of different polishing techniques on surface roughness and bacterial adhesion of three glass ionomer-based restorative materials : in vitro st…
2020
Background Although many reports concluded that polishing of glass ionomers is crucial for smoother surface and limiting the adhesion of cariogenic bacteria, there is no specific surface treatment protocol recommended. A novel material in the same category was released recently claimed to have surface smoothness comparable to resin composite and bacterial adhesion less than other types of glass ionomers. In this study, different polishing systems were tested with three glass ionomers one of them is the novel material to find the most appropriate polishing protocol. Objectives: To evaluate and compare the surface roughness and bacterial adhesion to resin modified glass ionomer, bioactive ion…
Functional Adhesion of Pectin Biopolymers to the Lung Visceral Pleura
2021
Pleural injuries and the associated “air leak” are the most common complications after pulmonary surgery. Air leaks are the primary reason for prolonged chest tube use and increased hospital length of stay. Pectin, a plant-derived heteropolysaccharide, has been shown to be an air-tight sealant of pulmonary air leaks. Here, we investigate the morphologic and mechanical properties of pectin adhesion to the visceral pleural surface of the lung. After the application of high-methoxyl citrus pectin films to the murine lung, we used scanning electron microscopy to demonstrate intimate binding to the lung surface. To quantitatively assess pectin adhesion to the pleural surface, we used a custom ad…
Water-Dependent Blending of Pectin Films: The Mechanics of Conjoined Biopolymers
2020
Biodegradable pectin polymers have been recommended for a variety of biomedical applications, ranging from the delivery of oral drugs to the repair of injured visceral organs. A promising approach to regulate pectin biostability is the blending of pectin films. To investigate the development of conjoined films, we examined the physical properties of high-methoxyl pectin polymer-polymer (homopolymer) interactions at the adhesive interface. Pectin polymers were tested in glass phase (10&ndash
The influence of different types of fixed orthodontic appliance on the growth and adherence of microorganisms (in vitro study).
2012
Orthodontic appliances serve as different impact zones and modify microbial adherence and colonization, acting as foreign reserves and possible sources of infection. This study was conducted to investigate the effect of different types of fixed orthodontic appliances on the growth and adherence of microorganisms in oral flora which are Streptococcus mutans (S. mutans) and Candida albicans. Sixty-four of four different fixed orthodontic appliance-samples were used, divided into four groups of sixteen. Type I: Sapphire brackets- Coated wires, type II: Sapphire brackets- Stainless steel wires, type III: Stainless steel brackets- Coated wires and type IV: Stainless steel brackets- Stainless ste…